Essex Groundworks Supplies Ltd Home PageAbout Essex Groundworks Supplies LtdView  a map of our location
 
 
 

Underground Drainage  |  Access Fittings  |  Concrete Surrounds 
Channel Components  |   Inspection Chambers  |  Adaptors 
Settlement Fittings  |  Polystorm Water Storage

Drainage - Polypipe EN401

Inspection Chambers - Covers & Frames
  Description
Load Classification for Covers & Frames (A) - Equivalent to Class A15 load category of BS EN124 : 1994 (pedestrians & pedal cyclists only)
(A+) - Tested to withstand 35KN test load (light vehicular traffic on domestic drives)
(C) - Tested to withstand 10KN test load (non vehicular traffic only)
Riser Joints: Its is imperative that a minimum 5mm continuous bead of silicone rubber sealant be applied to all riser socket grooves when assembling chambers. (A Dry Fix Rubber Sealing Ring is also available for the 460mm Circular Inspection Chambers)
  Description
110mm Code
 
110mm Shallow Access Chambers
320mm Dia. - 2x45 side Branch Inlets
320mm dia. - 4 side branch inlets 2x45 and 2x90
Sockets include captive ring seal for chamfered plain end pipe, Depth should not exceed 600mm
 
Base (170mm with 2 Blanking Plugs)
1/63 UG437
 
Base (170mm with 3 Blanking Plugs)
1/63 UG537
 
Side Riser (135mm)
1/90 UG438
 
Concrete Cover & Polypropylene Frame (C)
1/45 UG439
 
Aluminium Sealed Cover and Frame (C)
1/10 UG436
 
Square Concrete Cover & PP Frame (C)
1/45 UG499
 
Round PVC Cover & Frame (C)
-
Complete with seal and fixing screws
1/5 UG501
 
Square PVC Cover & Frame (C)
- Complete with seal and fixing screws
1/5 UG502
 
110mm Inspection Chambers
460mm dia. - 2x45 & 2x90 side branch inlets.
Depth should not exceed 1.2m


Sockets include captive ring seal for chamfered plain end pipe
 
Base (220mm with 3 Blanking Plugs)
1/28 UG440
 
Side Riser (215mm) - Increased Length
1/24/40 UG431
 
Riser Sealing Ring (for UG431 Dry Fix)
1/100 UG488
 
Cast Iron Cover & Frame - Class (A)
1 UG419
 
Cast Iron Cover & Polypropylene Frame - (A)
1 UG444
 
Concrete Cover & Polypropylene Frame - (A)
1 UG497
 
Square Polypropylene Cover & Frame - complete with seals & fixing screws (35kN Test Load)
1 UG512
 
Circular Polypropylene Screw down cover & frame, kitemarked to BS7158 (35kN Test Load)
1 UG511
 
Key & Lifting Handle
1 CLH500
 
Plastic Frame to Riser Fixing Kit
1 FRK500
 
Spare Black Ties (30) (for FRK500) - Not suitable for Cast Iron Frames
1 FRK501
 
110mm Rectangular
Inspection Chambers
610 x 460mm (24" x 18") (Black) Depth should not exceed 1.2 metres
 
Base (330mm with 3 Blanking Plugs)
1 UG490
 
Side Riser (180mm)
1/40 UG491
 
Steel Cover & Polypropylene Frame- (C)
1 UG496
 
Concrete Cover & PP Frame- (C)
1/10 UG495
 


2 x LH & 2 x RH 90 side branch inlets.
Side inlet Sockets include captive ring
seal for chamfered plain end pipe.
Main channel inlet & outlet are plain end
and require couplers or socketed pipes.

   
Non Man Entry
Deep Inspection Chambers
 
460mm diameter (black) for use at depths exceeding 1.2 metres but less than 4 metres
 
110mm base unit, includes base and four risers (1060mm high) (suitable for wall pipes) 5 x 110mm inlets
(1) ICDB3
 
110mm Base Unit, includes base and four risers (1060mm high) (suitable for Polysewer structured wall pipes)
2 x 110mm 45 inlets and 2 x 150mm 90 inlets. All Polysewer connections are open.
(1/4) ICDB1
 
160mm Base Unit, includes base and four risers (1060mm high) (suitable for single wall pipes) 2 x 110mm 45 inlets & 2 x 150mm 90 inlets
(1/4) ICDB2
 
Single Riser, 215mm effective hieght
 
Two Riser, 430mm effective height
 
Four Riser, 860mm effective height  
Eight Riser, 1720mm effective hiehgt  
Riser Sealing Rings  
Plastic Frame to Riser Fixing Kit (Set of four) - use 1 kit per cover  
Riser to Riser Fixing Kit (set of three) - use 1 kit per riser  
Square Cover & Frame - complete with seals and fixing screws 350mm diameter opening. 35kN test Load
 
160mm Insoection Chambers  
460mm diameter (black) Replaces UG686, 687, 688, & 689 (Sockets include captive ring seal for chamfered plain end pipe) Includes 2 x 160mm x 90 and 2 x 110mm x 45 Side inlets
 
Circular Base (258mm with 2 x 110mm and 2 x 160mm Blanking Plugs)
1/24 UG670
 
Spare Blanking Plug (PP) - 160mm (also for 160mm Pipe & Fitting Sockets)
1 UG645
 
Spare Blanking Plug (PP) - 110mm fits UG 437, 440, 490, & 670 Bases
1 UG445
 

160mm Manhole Base

Circular 750mm diameter (Black MDPE)
2 x 45 & 2 x 90 Branch Inlets for 160mm pipes

The 160mm base is supplied with all inlets and the outlet closed. Use fine tooth saw to ends for connection of Couplers, Fitting or Pipe Sockets and Superclay Adaptors. For 110mm inlet, use UG602 Coupler with UG621 Reducer.
For connection to superclay use Adapter UG634 for 160mm. The manhole base should be set in a concrete bed and surround up to top of the flange with adequate side extension to secure all-round base support for brick or pre-cast concrete chamber rings. Depth should not exceed 10 metres.
1 UG616